KEIN Engine mount for Infiniti Q50, Infiniti Q60 3.0t [AWD], 3.7L [2WD/AWD]

KEIN Engine Mounts for Infiniti Q50 (2014-2018) & Infiniti Q60 (2017-2022) - 3.0t [AWD], 3.7L [2WD/AWD].
KEIN's stiffer engine mount damping bushings help to combat engine shifting during hard acceleration and cornering. During hard acceleration and dynamic cornering.
Reinforced engine mounts ensure correct and reliable operation of the engine and transmission at high engine speeds, allowing for more precise gear changes.
When cornering, the risk of drifting on exit is reduced, due to the rigid design of the engine mounts - increasing the dynamics and control of the car, which will be appreciated by both fans of rally and drifting, as well as ordinary fans of dynamic driving.

The special design of the engine mounts prevents the engine from tearing away from the subframe.
This solution is suitable for motorsport and aggressive driving enthusiasts, as you remove the soft rubber mounts, vibrations and engine noise in the cabin will be slightly higher.

Advantages:
• More efficient transmission of torque
• Reduces engine roll, which in turn improves acceleration.
• Increased sense of control and reduced risk of drifting out of corners.
• More precise gear shifting
• KEIN engine mounts are much more reliable and durable than standard engine mounts.

Item content:
KEIN reinforced engine mount kit for Infiniti Q50 (2014-2018) & Infiniti Q60 (2017-2022) - 3.0t [AWD], 3.7L [2WD/AWD] - 2 pcs. (Left & Right)
• X2+X2 Quality molded high density silent blocks (inserted in the support)
Bolts with a strength of approximately 50 kN.

Hardness bushings:
Shore a hardness 65A (International Standard ISO 868)

Features:
• Material: Steel K02001/ K02502 
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc

Weight: -kg.

Important:
The stiffer silent blocks and stiffer construction result in precise shifting and an overall improvement in vehicle dynamics.
There may be a slight increase in interior noise and vibration.

Installation:
Replaces original engine mount (OEM part numbers): 11320-4GA5A

Fits: (Based off of Inifiniti OEM cross reference):
• Infiniti Q50, 3.5L V6 FULL HYBRID EV-GAS (FHEV) AT 2WD Sedan (2014-2018)
• Infiniti Q50, 3.5L V6 FULL HYBRID EV-GAS (FHEV) AT 4WD Sedan (2014-2018)
• Infiniti Q50, 3.7L V6 AT 2WD Sedan (2014-2015)
• Infiniti Q50, 3.7L V6 AT 4WD Sedan (2014-2015)
• Infiniti Q50, AT 2WD Sedan (2016-2022)
• Infiniti Q50, AT 4WD Sedan (2016-2022)
• Infiniti Q60, 3.0L V6 AT 2WD TT COUPE BASE (2017-2022)
• Infiniti Q60, 3.0L V6 AT 2WD TT COUPE PREMIUM (2017-2022)
• Infiniti Q60, 3.0L V6 AT 2WD TT COUPE PREMIUM UPPER (2017-2019)
• Infiniti Q60, 3.0L V6 AT 2WD TT COUPE SPORTS (2017-2020)
• Infiniti Q60, 3.0L V6 AT 2WD TT COUPE SPORTS UPPER (2017-2022)
• Infiniti Q60, 3.0L V6 AT 4WD TT COUPE BASE (2017-2022)
• Infiniti Q60, 3.0L V6 AT 4WD TT COUPE PREMIUM (2017-2022)
• Infiniti Q60, 3.0L V6 AT 4WD TT COUPE PREMIUM UPPER (2017-2019)
• Infiniti Q60, 3.0L V6 AT 4WD TT COUPE SPORTS (2017-2020)
• Infiniti Q60, 3.0L V6 AT 4WD TT COUPE SPORTS UPPER (2017-2022)
• Infiniti Q60, AT 2WD COUPE BASE (2017-2018)
• Infiniti Q60, AT 2WD COUPE PREMIUM (2017-2019)
• Infiniti Q60, AT 4WD COUPE BASE (2017-2018)
• Infiniti Q60, AT 4WD COUPE PREMIUM (2017-2019)