KEIN Engine Mount set for BMW E82 E84 E88 E89 E90 E91 E92 | 22116760330

KEIN Engine Mounts for BMW 1-Series [E81, E82, E87, E88] & BMW 3-Series [E90, E91, E92, E93] & BMW X1 [E84] & BMW Z4 [E89].
KEIN's stiffer engine mount damping bushings help to combat engine shifting during hard acceleration and cornering. during hard acceleration and dynamic cornering.
Reinforced engine mounts ensure correct and reliable operation of the engine and transmission at high engine speeds, allowing for more precise gear changes.
When cornering, the risk of drifting on exit is reduced, due to the rigid design of the engine mounts - increasing the dynamics and control of the car, which will be appreciated by both fans of rally and drifting, as well as ordinary fans of dynamic driving.

The special design of the engine mounts prevents the engine from tearing away from the subframe.
Even greater effect can be achieved by using KEIN engine mounts + KEIN transmission mounts in combination, the improved engine and transmission mounts allow more power to be transmitted to the driveshafts. The stiffer connection of the transmission support to the subframe reduces torque losses.
This solution is suitable for motorsport and aggressive driving enthusiasts, as you remove the soft rubber mounts, vibrations and engine noise in the cabin will be slightly higher.

Advantages:
• More efficient transmission of torque
• Reduces engine roll, which in turn improves acceleration.
• Increased sense of control and reduced risk of drifting out of corners.
• More precise gear shifting
• KEIN engine mounts are much more reliable and durable than standard engine mounts.

Item content:
KEIN reinforced engine mount kit for BMW Engines N51, N52, N54, N55 - 2 pcs. (Left & Right)
• X2+X2 Quality molded high density silent blocks (inserted in the support)
Bolts with a strength of approximately 50 kN.

Hardness bushings:
Shore a hardness 65A (International Standard ISO 868)

Features:
• Material: Steel K02001/ K02502 
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc

Weight: -kg.

Important:
The stiffer silent blocks and stiffer construction result in precise shifting and an overall improvement in vehicle dynamics.
There may be a slight increase in interior noise and vibration.

Installation:
Replaces original engine mount (OEM part numbers):
• L+R A4012 9682
• R 22116773744 
• L 22116760330 

For engines:
• N51/N52 Cars Require 2 Mounts
• N54/N55 Cars Require 1 Mount
(Driver Side)

For example, machines such as:

1-Series + 1M:
• BMW [E81] 2006 – 2011 
• BMW [E82] 2006 - 2013
• BMW [E87] 2005 - 2011
• BMW [E88] 2006 – 2013

3-Series (excludes the M3):
• BMW [E90] 2006 – 2011
• BMW [E91] 2006 - 2012
• BMW [E92] 2005 – 2010
• BMW [E93] 2005 - 2013

X1:
• BMW X1 [E84] 2009 - 2015

Z4:
• BMW Z4 [E89] 2009 - 2016