KEIN Reinforced Transmission Mount kit for Subaru | 6-Speed

New at RisingTuning, KEIN Transmission Mount kit for Subaru models (Six-speed gearbox).
KEIN's stiffer transmission support damping bushings reduce or completely eliminate transmission vibrations - this ensures proper and reliable operation between the engine and transmission at high engine speeds, providing more precise shifting.
Also, the modified support allows more power to be transmitted to the drive shafts, due to the tighter connection of the transmission support to the subframe, so more power is transmitted to the drive shafts at any position of the entire powertrain, even more effect can be achieved with KEIN engine mounts for Subaru.
More accurate launches during drag racing and autocross type events with reduced drivetrain slop.
Compared to the original transmission support, the design of the reinforced support does not allow the transmission to rise relative to the subframe.

Features:
• Increases steering response
• More precise gear shifting
• Prevents transmission movement throughout the entire RPM range.
• Greater sense of vehicle control

Item content:
KEIN reinforced transmission mount kit for 6-speed transmission of Subaru - 1pc.
• X2 Quality molded high density silent blocks (inserted in the support)
*This kit is suitable for 6-speed transmission only, also in our RisingTuning store we have KEIN mount for 5-speed transmission in stock.

Hardness bushings:
Shore a hardness 65A (International Standard ISO 868)

Features:
• Material: Steel K02001/ K02502
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc

Weight: 1.4kg.

Important:
The stiffer silent blocks and stiffer construction result in precise shifting and an overall improvement in vehicle dynamics.
There may be a slight increase in interior noise and vibration.

Installation:
Replaces original transmission mount (OEM part numbers):
• 41022AA180 • 41022AC180
• 41022AA220 • 41022AC170
• 41022AA320 • 41022AC040
• 41022AC170 • 41022FE020

For example, machines such as:
• Subaru Impreza 1993-2011
• Subaru Impreza STI 1993-2020
• Subaru Forester XT 1996-2013
• Subaru Legacy GT 2005-2009

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the suspension are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.