New at RisingTuning, the KEIN rear strut X-Brace for Subaru Impreza WAGON 2nd-generation.
The KEIN power struts reinforce the chassis and minimize bending of the body, especially important under cornering loads, thereby ensuring optimal suspension movement in a given geometrically aligned condition. Power struts help achieve a more aligned, crisp and predictable control from the car, which is especially necessary if you are important to the results in time racing.
The power strut is a welded structure of tubes and bolted supports - thereby creating an additional stiffening unit between the load-bearing body parts when installed, creating a more responsive car handling.

Item content:
• KEIN X-Brace rear cross strut for Subau Impreza 2 (wagon GG) - 5 pcs.
*Suitable only for Wagon versions, not fit to sedan GD body

Fastening elements:
• nuts, bolts included

Advantages:
• Bolt-on. The rear seats are put back in when the X-Brace is installed,
the spacer does not interfere with the operation of the seats and fits back into its factory connections.
• To install additional fasteners and tabs are not needed, all necessary in the kit.
There is no need to drill or weld anything!

Features:
• Material: Steel, K02001 / K02502
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc
• Tested on the track and on the street.

Weight: 4.25kg.

Important information:
Please note this power X-strut KEIN designed for Wagon (GG) version,
if you have a sedan version (GD) then you need: KEIN rear cross strut X-Brace for Subaru Impreza 2 Sedan GD,
as well as a small X-Brace which is compatible with JDM Spec C water tank V=12

Installation:
Installation is simple, The strut behind the rear seat is installed in the regular places in the luggage compartment opening, turning it into a rigid truss.
The rigid rear part of the car improves handling even during everyday use of the car.

This X-brace is compatible with this cars:

Short: All Subaru Impreza 2nd gen Wagon, 2000-2007 (GG)

SUBARU IMREZA (STOCK)

Europe & World:
Subaru Impreza [GG|G11], 2 Gen, Wagon, 04.2000 - 10.2002, Body: GG5, GG9
Subaru Impreza [GG|G11], 2 Gen Facelift, Wagon, 11.2002 - 05.2005, Body: GG5, GG9
Subaru Impreza [GG|G11], 2 Gen Second Facelift, Wagon, 06.2005 - 08.2007, Body: GG9, GGD

Japan & World:
Subaru Impreza [GG|G11], 2 Gen, Wagon, 08.2000 - 10.2002, Body: GG2, GG3, GG9, GGA
Subaru Impreza [GG|G11], 2 Gen Facelift, Wagon, 11.2002 - 05.2005, Body: GG2, GG3, GG9
Subaru Impreza [GG|G11], 2 Gen Second Facelift, Wagon, 06.2005 - 06.2007, Body: GGC, GGD, GG2, GG3

SUBARU IMREZA WRX

Europe & World:
Subaru Impreza WRX [GG|G11], 2 Gen, Wagon, 04.2000 - 10.2002, Body: GG
Subaru Impreza WRX [GG|G11], 2 Gen Facelift, Wagon, 11.2002 - 05.2005, Body: GGA
Subaru Impreza WRX [GG|G11], 2 Gen Second Facelift, Wagon, 06.2005 - 09.2007, Body: GG

Japan & World:
Subaru Impreza WRX [GG|G11], 2 Gen Facelift, Wagon, 11.2002 - 05.2005, Body: GGA
Subaru Impreza WRX [GG|G11], 2 Gen Second Facelift, Wagon, 06.2005 - 06.2007, Body: GGA

SUBARU IMREZA WRX STI

Japan & World:
Subaru Impreza WRX STI [GG|G11], 2 Gen, Wagon, 10.2000 - 10.2002, Body: GGB

Years of issue Impreza: 2000, 2001, 2002, 2003, 2004, 2005, 2005, 2006, 2007

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the cars are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.