Protective pads covers on rear view mirrors for Fiat Ducato X250, Peugeot Boxer, Citroen Jumper

The rear view side window covers are made of ABS plastic with an embossed surface (shagreen). These covers protect the side windows from dirt and insects, as well as from damage to the mirror housing. 
The main advantage of the pads is not only its protective cushioning properties in case of impact on the mirrors from the front side, but it allows you to leave the side windows clean, and this is safety, in the case of rain and adverse weather conditions standard mirrors do not protect from dirt. Dust flying out from under the front arch obscures the view of the driver's side windows, which is dangerous. When the plates are installed, the gap between the mirror and the front pillars of the car closes, and the flying dust settles on the plates, and the glasses stay clean, which means the maximum visibility of what is going on behind. These are the design features of the Ducato mirrors in the X250 X290 body. Our users who own commercial vehicles recommended adding these mirror covers to the range and RisingTuning did it. 

Item content:
Protective covers on rear view mirrors for Fiat Ducato, Peugeot Boxer, Citroen Jumper 250 / 290 with ABS plastic - 2 pcs. (Left & Right)

Features of this product:
• Made of ABS plastic, this is not FRP
• Material thickness 2 mm
• Surface finish: Textured ABS
• "Bolt-on" tuning item, It fits perfectly!
• This pads can be fastened with 3M double tape / Black car sealant.
• Fasteners are not included
• The product is unpainted.
• Surface Finish: Black textured can be used as is or painted

Installation:
The covers can be mounted on the mirror housing with a double-sided adhesive tape or sealant of your choice. Fasteners are not included

Useful Information:
The Citroen Jumper for the British and Irish markets was sold as the Citroen Relay. And the Peugeot Boxer for the Mexican market was sold as the Peugeot Manager.
After the acquisition of Opel and Vaxuhall by Groupe PSA and its subsequent merger with FCA to form Stellantis, the Ducato was renamed Opel/Vauxhall Movano, which was previously based on the Renault Master.

This grille fits on these cars:

DUCATO

Europe / World:
Fiat Ducato, 3 Generation, Van & Bus, Years: 06.2006 - 02.2014, Body: 250
Fiat Ducato, 3 Generation Restyling, Van & Bus, Years: 03.2014 - Present, Body: 290

BOXER & MANAGER

Europe / World:
Peugeot Boxer, 2 Generation, Van & Bus, Years: 07.2006 - 08.2014, Body: 250
Peugeot Boxer, 2 Generation Restyling, Van & Bus, Years: 09.2014 - Present, Body: 290

JUMPER & RELAY

Europe / World:
Citroen Jumper, 2 Generation, Van & Bus, Years: 07.2006 - 08.2014, Body: 250
Citroen Jumper, 2 Generation Restyling, Van & Bus, Years: 09.2014 - Present, Body: 290

Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Mounted on machines: L1H1, L1H2, L2H1, L2H2, L3H2, L3H3, L4H2, L4H3


Material of this pads:
Different materials are used for manufacturing car tuning elements, the beauty, practicality and durability of the parts depend on their properties. To make you satisfied with the results, Rising Tuning manufactures and procures car parts including ABS plastic, a polymer that differs favorably from other materials.
This plastic demonstrates increased impact resistance, in which it surpasses styrene copolymers - polystyrene. This material is also characterized by mechanical stiffness and strength, wear resistance and resistance to deformation and melting in short-term heating up to 100 degrees Celsius. At temperatures up to 70-80 degrees Celsius, products made of this polymer can be used for a long time without their qualities deteriorating and while maintaining dimensional stability.
These properties allow to use ABS plastic for manufacturing of the most various elements of car body

Advantages of ABS plastic:
Optimal combination of shock resistance and elasticity provides longevity of the products.
• Under light torsion loads plastic elements restore their original shape without residual deformation.
• High dimensional stability which allows manufacturing of complex molded products with high accuracy.
• Good adhesion to paint materials, which allows them to paint products in any desired color.