Lift kit for Lexus RX - Third generation | AL10 | 2008-2015

Lift set for Lexus RX - Third generation (2008-2015) | Classic Series

Upgrade the off-road capability and rough-road performance of your third-generation Lexus RX (AL10). Increasing the ground clearance significantly improves the vehicle’s approach and departure angles, allowing you to easily navigate deep winter snow, rutted trails, and steep inclines without high-centering or scraping the bottom. This polyurethane lift kit elevates the chassis to protect your vulnerable underbody, oil pan, and exhaust system from hidden rocks and rough terrain, all while keeping your exact factory suspension settings and ride comfort.

• Front strut spacers | 40 mm (1.6") — 2 pcs.
• Rear coil spacers | 40 mm (1.6") — 2 pcs.
• Front Reinforced studs | M10 extended — 6 pcs.

• Front: +40mm lift (40mm spacers)
• Rear: +40mm lift (40mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

☑️ Full Compatibility: This lift kit is 100% compatible with all third-generation Lexus RX model variants equipped with standard coil spring suspension. It seamlessly fits all factory versions — including RX270, RX350, and RX450h — across all trim levels, drivetrain configurations (Front-Wheel Drive and All-Wheel Drive / E-Four), and all powertrain options produced from 12.2008–09.2015.

⚠️ AVS Notice: Premium trim levels and performance variants (such as F Sport and Luxury) are frequently factory-equipped with the AVS (Adaptive Variable Suspension) system. While this lift kit is physically 100% compatible with AVS dampers, it requires mandatory mechanical sensor height adjustment and a Zero Point Calibration using a diagnostic scanner post-installation. If you or your workshop are not prepared to perform these complex suspension sensor configurations, this lift kit is NOT recommended for your vehicle. Skipping this step will lead to setup difficulties, incorrect adaptive damping behavior, and chassis control system errors.

⚠️ Air Suspension: This lift kit is NOT compatible with vehicles factory-equipped with OEM electronically controlled Air Suspension (Air Spring struts) GGL15/GYL15. The mounting points, strut top designs, and height control systems are completely different. Do NOT attempt to install this kit on air suspension models.

• Front Axle Installation (Studs): This kit requires pressing out the original factory splined studs from the front upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Note on Rear Spacer Design: To achieve the stated +40mm of actual lift, the physical thickness of the rear spacers is calculated to include the height of the original factory spring pads. By integrating these measurements, we ensure a precise fit and the exact lift height promised, regardless of the thickness of your old, worn-out factory isolators.
• Installation Note (Rear Axle): Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Lift Height Disclaimer: Please note that the final achieved lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as factory spring fatigue, engine and powertrain weight configurations (standard 2.7L L4 / 3.5L V6 petrol vs. significantly heavier Hybrid AWD systems with battery packs on RX450h), and the presence of heavy optional equipment can influence the final suspension height.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +40mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Lexus RX:

• ◀️ Previous: Lexus RX - Second generation [XU30] (2004-2009)

• Next: Lexus RX - Fourth generation [AL20] (2015-2022) ▶️