Front diff drop brackets kit + bushings for Suzuki Vitara [TA, ET] | 1.6L Narrow frame
- Product Code: KTFG-2461/KTSBFG-6215
- Product Article: product-697
- Rating:
- Availability:
In Stock
-
Levers lowering front axle Suzuki + angled silent blocks for Suzuki TD01 front reducer rear mounting
When raising the front suspension of the Suzuki Escudo, Vitara Gen 1 by more than 7 cm (3"), it is recommended to lower the reducer to equalize the drive angles. On a narrow frame.
Item content:
Levers lowering front reduction:
The levers replace the standard levers and allow you to lower the front of the gearbox by 25 mm (1"), with the drives in the best possible position, which will prolong their service life.
• Front reduction arm left SE1-1.6 - 1 piece, material - steel, polymer coating.
• Front reduction lever right SE1-1.6 - 1 piece, material - steel, polymer coating.
Twist silent blocks of the Suzuki front reduction gear mounting at the rear:
• Silentblock PU-38x60x12 - 2 pcs, material - polyurethane.
Features front reducer lowering levers:
• The levers are made on professional laser, turning and welding equipment, in compliance with the necessary specifications.
• They have a protective polymer coating that prevents corrosion.
Features of silentblocks:
• Manufactured with a beveled surface that allows the gearbox to be tilted in order to mount the arms at the correct angle.
• Polyurethane retains its elasticity and flexibility under heavy loads and strains during operation in the vehicle's chassis components.
• Polyurethane is well-proven under high and low temperatures as well as under the influence of aggressive environment - gasoline, oils and road reagents.
• Polyurethane products withstand considerable loads in severe operating conditions and do not lose their physical and chemical characteristics for a long time.
Weight: 2.5 kg.
Important:
After replacing the levers, you need to check the oil level in the gearbox and pour a little above the level, this can be done by lifting the front of the car, or through the breather. Suitable only for versions that have a narrow frame, this frame was fitted to a 1.6 liter engine
This complete lift kit is compatible with this cars:
VITARA
Europe / World:
Suzuki Vitara, 1 Generation, Years: 07.1988 - 01.1999, SUV 3 & 5-doors, Body: ET
Suzuki Vitara, 1 Generation, Years: 07.1991 - 01.1999, SUV 5-doors, Body: TA
SIDEKICK
USA / World:
Suzuki Sidekick, 1 Generation, Years: 07.1988 - 01.1999, SUV 3 & 5-doors, Body: ET
ESCUDO
Japan / World:
Suzuki Escudo, 1 Generation, Years: 05.1988 - 11.1994, SUV 3-doors, Body: AT01W, TA01V, TA01W
Suzuki Escudo, 1 Generation, Years: 05.1988 - 11.1994, SUV Cabrio 3-doors, Body: TA01R
Suzuki Escudo, 1 Generation, Years: 09.1990 - 11.1994, SUV 5-doors, Body: TD01W
Suzuki Escudo, 1 Generation Restyling, Years: 12.1994 - 10.1997, SUV 5-doors, Body: TD01W, TD11W, TD51W, TD61W, TD31W
Suzuki Escudo, 1 Generation Restyling, Years: 12.1994 - 10.1997, SUV 3-doors, Body: TA01W, TA11W, TA51W, TA31W
Suzuki Escudo, 1 Generation Restyling, Years: 12.1994 - 10.1997, SUV Cabrio 3-doors, Body: TD01W
X-90
Japan / World:
Suzuki X-90 (EL), 1 Generation, Years: 10.1995 - 12.1998, SUV 3-doors, Body: LB11S
TRACKER
USA / World:
Chevrolet Tracker , 1 Generation, Years: 10.1988 - 11.1998, SUV 3 & 5-doors
GEO Tracker , 1 Generation, Years: 10.1988 - 11.1998, SUV 3 & 5-doors
Years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
- Chevrolet
- Tracker
- I 1988-1998
- Tracker
- Suzuki
- Escudo
- I 1988-1997 (TA01R, TA01V, AT01W, TA01W, TA11W, TA31W, TA51W)
- Vitara
- I 1988-1998 (TA,ET)
- X-90
- I 1995-1998 EL (LB11S)
- Escudo