Lift kit Classic for Toyota Harrier - Third generation | XU60 | 2013-2020

Lift set for Toyota Harrier - Third Generation (2013-2020) | Classic Series

Give your third-generation Toyota Harrier (XU60, 2013–2020) the clearance it needs for snow, rough ruts, and steep inclines. This Classic polyurethane lift kit raises ride height to reduce the risk of scraping bumpers or taking harsh impacts to the underbody. Polyurethane spacers increase overall ground clearance, while steel rear shock extenders preserve essential damper travel on rebound—preventing shocks from topping out and keeping your original ride quality intact.

• Front strut spacers | 30 mm (1.2") — 2 pcs.
• Rear coil spacers | 35 mm (1.4") — 2 pcs.
• Rear shock extenders | 40 mm (1.6") — 2 pcs.
• Front Reinforced studs | M10 extended — 6 pcs.

• Front: +40mm lift (30mm spacers*)
• Rear: +40mm lift (35mm spacers*)

*Leverage geometry: Due to suspension linkage ratios, 30mm front and 35mm rear spacers yield the actual +40mm net lift. Full details in "Technical Notes".

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is engineered for:

Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

☑️ Full Compatibility: This lift kit is 100% compatible with all third-generation Toyota Harrier (XU60) model variants across all production years (both Pre-facelift and Facelift versions). It seamlessly fits all standard factory trim levels (Grand, Elegance, Premium, Progress), both drivetrain configurations (Front-Wheel Drive and E-Four All-Wheel Drive), and all powertrain options (including 2.0L Naturally Aspirated, 2.0L Turbo, and 2.5L Hybrid variants) produced from 12.2013–05.2020.

⚠️ G's / GR Sport Trim Notice: While this lift kit is physically 100% compatible with factory sports packages — Harrier Elegance G's (G Sports, 2015–2017) and Harrier GR Sport (2017–2020) — please note that these performance editions come equipped from the factory with sports suspension featuring lowered springs (-35 mm ride height reduction) and retuned dampers. Installing this lift kit on G's / GR Sport models will yield a lower total ground clearance compared to standard OEM suspension setups.

• Front Axle Installation (Studs): This kit requires pressing out the original factory splined studs from the front upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Note on Front Spacer Design: To achieve the stated +40mm of actual lift, the kit utilizes 30mm front strut spacers. The geometry is precisely calculated to account for suspension leverage, resulting in a balanced 40mm height increase.
• Installation Note (Rear Axle): Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Note on Rear Spacer Design: To achieve the stated +40mm of actual lift, the kit utilizes 35mm rear coil spacers. The geometry is precisely calculated to account for suspension leverage and factory isolator replacement, resulting in a balanced 40mm height increase.
• Rear Shock Extenders: Included 40mm steel extenders are required for this +40mm lift to compensate for extended suspension travel and restore the factory damper stroke range. Note: Extenders are required on this platform for lifts of 30mm or greater.
• Lift Height Disclaimer: Please note that the final achieved lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as factory spring fatigue, powertrain weight configurations (standard 2.0L Petrol vs. heavier 2.0L Turbo and significantly heavier 2.5L Hybrid AWD system with high-voltage traction battery), panoramic glass roof options, and heavy optional equipment can influence the final suspension height.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +40mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Toyota Harrier:

• ◀️ Previous: Toyota Harrier - Second generation [XU30] (2004-2013)

• Next: Toyota Harrier - Fourth generation [XU80] (2020-present) ▶️