Lift Kit for Lincoln MKC - First generation | 2014-2019

Lift set for Lincoln MKC - First generation (2014-2019) | Classic Series

Add the necessary ground clearance to your Lincoln MKC to handle everyday road obstacles without stress. A raised ride height prevents the front bumper from scraping against curbs when parking and protects the exhaust system when driving through deep winter snow or over speed bumps. This polyurethane lift kit gives you the extra clearance needed to avoid underbody damage from hidden rocks or uneven terrain, while keeping your factory suspension comfort entirely unchanged.

• Front strut spacers | 40 mm (1.6") — 2 pcs.
• Rear coil spacers | 40 mm (1.6") — 2 pcs.
• Rear shock extenders | 40 mm (1.6") — 2 pcs.
• Front High-tensile bolts | M8 extended — 6 pcs.
• Rear High-tensile bolts | M10 extended — 4 pcs.
• Additional fasteners | Mounting set — 1 set.

• Front: +40mm lift (40mm spacers)
• Rear: +40mm lift (40mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

*FL = Facelift / Restyling

Years: 2014, 2015, 2016, 2017, 2018, 2019

☑️ Full Compatibility: This lift kit is 100% compatible with all first-generation Lincoln MKC model variants. It seamlessly fits all factory trim levels (including Premiere, Select, Reserve, and Black Label), both drivetrain configurations (Front-Wheel Drive and All-Wheel Drive), and all powertrain options (including 2.0L and 2.3L EcoBoost turbo petrol engines) produced from 2014–2019.

⚠️ CCD Notice: Premium trim levels and top-tier configurations (such as Reserve and Black Label) are frequently factory-equipped with the CCD (Continuously Controlled Damping) adaptive suspension system. While this lift kit is physically 100% compatible with CCD dampers, it requires mandatory mechanical sensor adjustment and electronic calibration post-installation. If you or your workshop are not prepared to perform these complex suspension sensor configurations, this lift kit is NOT recommended for your vehicle. Skipping this step will lead to setup difficulties, incorrect adaptive damping stiffness, and chassis control system errors.

• Front & Rear Axle Installation (Bolts): To accommodate the lift spacers, the original factory bolts in the struts must be replaced with the high-tensile extended bolts included in the kit. These bolts thread directly into the strut mount to ensure a secure and rigid connection.
• Shock Geometry & Extenders (Rear Axle): To maintain the correct suspension travel after lifting, this kit includes rear shock absorber extenders. These are essential for preserving the lifespan of your shocks and ensuring the piston operates within its intended range, preventing "bottoming out" on uneven roads.
• Note on Rear Spacer Design: To achieve the stated +40mm of actual lift, the physical thickness of the rear spacers is calculated to include the height of the original factory spring pads. By integrating these measurements, we ensure a precise fit and the exact lift height promised, regardless of the thickness of your old, worn-out factory isolators.
• Installation Note (Rear Axle): Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Lift Height Disclaimer: Please note that the final achieved lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as factory spring fatigue, engine weight configurations (2.0L EcoBoost vs. the heavier 2.3L EcoBoost AWD drivetrain), and the presence of heavy optional equipment can influence the final suspension height.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +40mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.