Lift kit for Hyundai Genesis - First generation | BH | 2008-2013

Lift set for Hyundai Genesis - First Generation (2008-2013) | Classic Series.

Restore the correct ride height of your Hyundai Genesis and protect its long wheelbase from road contact. Over time, the factory suspension often sags, causing the underbody and front bumper to scrape on uneven roads or speed bumps. These polyurethane spacers raise the chassis to eliminate this problem and defend your lower oil pan and exhaust. The durable material absorbs road noise and vibrations, preserving the original quiet and smooth luxury comfort of your sedan.

• Front strut spacers | 30 mm (1.2") — 2 pcs.
• Rear coil spacers | 20 mm (0.8") — 2 pcs.
• Rear shock extenders | 20 mm (0.8") — 2 pcs.
• Front Reinforced studs | M8 extended — 6 pcs.
• Rear High-tensile bolts | M10 extended — 4 pcs.
• Additional fasteners | Mounting set — 1 set.

• Front: +30mm lift (30mm spacers)
• Rear: +30mm lift (20mm spacers*)

*Leverage geometry: 20mm spacer results in 30mm actual body lift. Details in "Technical Notes".

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2008, 2009, 2010, 2011, 2012, 2013.

☑ Full Compatibility: This lift kit is fully compatible with all models and trim levels of the Hyundai Genesis - First Generation.

• Front Axle Installation (Studs): This kit requires pressing out the original factory splined studs from the front upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Rear Axle Installation (Bolts): To accommodate the lift spacers, the original factory bolts in the rear upper shock mounts must be replaced with the high-tensile extended bolts included in the kit. These bolts thread directly into the body mounting points to ensure a secure and rigid connection.
• Shock Geometry & Extenders (Rear Axle): To maintain the correct suspension travel after lifting, this kit includes rear shock absorber extenders. These are essential for preserving the lifespan of your shocks and ensuring the piston operates within its intended range, preventing "bottoming out" on uneven roads.
• Note on Rear Spacer Design: To achieve the stated +30mm of actual lift, the kit utilizes a combination of 20mm rear coil spacers and 20mm shock extenders. The geometry is precisely calculated to account for the suspension leverage and the replacement of factory isolators, resulting in a balanced 30mm height increase across all axles.
• Installation Note (Rear Axle): Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Lift Height Disclaimer: Please note that the final lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as spring fatigue, engine weight (V6 vs. V8), and the presence of heavy optional equipment can influence the final result.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +30mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Hyundai Genesis:

• Next: Hyundai Genesis - Second generation [DH] (2013-2016) ▶️