Lift kit for Chevrolet Blazer - Third generation | C1UC | 2019-present

Lift set for Chevrolet Blazer - Third generation (2018-present) | Classic Series.

Give your Third Generation Chevrolet Blazer the practical ride height it lacks from the factory. Despite its sporty design, this crossover has a low front bumper and a rear suspension that easily sags under load. These polyurethane spacers raise the entire chassis to protect your low-hanging trim and underbody from damage. This upgrade improves capability in deep snow and on rough roads, while absorbing vibrations to keep the original smooth ride.

• Front strut spacers | 30 mm (1.2") — 2 pcs.
• Rear coil spacers | 30 mm (1.2") — 2 pcs.
• Front High-tensile bolts | M8 extended — 6 pcs.
• Additional fasteners | Mounting set — 1 set.

The third-generation Chevrolet Blazer features two different factory rear suspension designs. We have both spacer variants fully in stock and ready to ship.

To ensure you receive the exact configuration for your specific vehicle and avoid any fitment issues during installation, please provide your VIN (Vehicle Identification Number) in the order notes at checkout. Our team will verify the suspension type and include the correct matching rear spacers in your kit.

• Front: +30mm lift (30mm spacers)
• Rear: +30mm lift (30mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026+

This lift kit is specifically engineered for the Chevrolet Blazer C1UC platform (Third Generation). The suspension design and chassis mounting points are identical across all global markets, despite variations in body length:

• Chevrolet Blazer — North America, South America, and Middle East markets (5-seater configuration).
• Chevrolet Blazer L — Chinese market (7-seater extended configuration).

Body Variations:

• Long Wheelbase — Extended body variant featuring three rows of seating.
• Short Wheelbase — Standard body variant featuring two rows of seating.

☑ The kit is 100% compatible with both Long Wheelbase and Short Wheelbase versions. It perfectly fits all trim levels (including RS and Premier), drive configurations (Front-Wheel Drive and All-Wheel Drive), and configurations produced from 2018 to the present day.

• Front Axle Installation: To accommodate the lift spacers, the original factory bolts in the front struts must be replaced with the high-tensile extended bolts included in the kit. These bolts thread directly into the strut mount to ensure a secure and rigid connection.
• Rear Axle Installation: Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Note on Rear Spacer Design: To achieve the stated +30mm of actual lift, the physical thickness of the rear spacers is calculated to include the height of the original factory spring pads. By integrating these measurements, we ensure a precise fit and the exact lift height promised, regardless of the thickness of your old, worn-out factory isolators.
• Lift Height Disclaimer: Please note that the final lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as spring fatigue, engine weight (petrol vs. diesel), and the presence of heavy optional equipment can influence the final result.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +30mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.