Suspension lift is used to increase ground clearance - the ground clearance between the ground and the body,
which increases the geometric cross-country ability of your Mitsubishi Pajero Mini & Mitsubishi Pajero Junior & Nissan Kix.

The total amount of clearance increase will be +50mm. The set consists of 6 parts, what the set consists of:

x2 Front strut steel spacers with offset | 45mm / 1.8 Inches
Installed on OEM front struts, without knocking out bolts from the original support, without using long bolts.
OEM supports: MB303452, MB844042.
• The spacers are made with an offset to compensate for the camber angle of the front wheels when the suspension is lifted.
• The spacers are manufactured on professional laser, turning and welding equipment, in compliance with the necessary specifications.
• Material: Steel, polymer coating.
• Included in the kit: Bolt M8 - 6 pcs.

x2 Rear Polyurethane coil spacers | 50mm / 2 Inches
When installing, remove the OEM rubber spacer MB242736, it will be replaced by a new polyurethane spacer.
Allows you to leave the standard rear springs and retain the "softness" of the suspension, with an lift of 50 mm.
• Made of high quality polyurethane with increased hardness, which retains its properties under any atmospheric conditions.
•  Due to increased hardness, they do not sag in all suspension operating modes, while possessing damping properties.
•  Reliably centers the spring in relation to the bumpstop

X2 Rear Shock absorber extenders | H36x12x40mm
Extend OEM shock absorbers with a bushing width of 34-36mm, and a bore diameter of 12mm. 
•  The extensions are manufactured using professional laser, bending and welding equipment, in compliance with the required specifications.
•  They have a protective zinc coating to prevent corrosion.
• Included in the kit: Bolt M12x1,25x60 - 2 pcs, SNK nut M12 - 2 pcs., material steel, zinc coating.

Weight of the set: 3.54kg.

This complete lift kit is compatible with this cars:
• Nissan Kix, 1 Generation, SUV 3-doors, 2008 - 2012 (H59A)
• Mitsubishi Pajero Junior/Jr., 1 Generation, SUV 3-doors, 1995 - 1998 (H57A)
• Mitsubishi Pajero Mini, 1 Generation, SUV 3-doors, 1994 - 1998 (H51A, H56A)
• Mitsubishi Pajero Mini, 2 Generation, SUV 3-doors, 1998 - 2008 (H53A, H58A, 53A)
• Mitsubishi Pajero Mini, 2 Generation Facelift, SUV 3-doors, 2008 - 2012 (H53A, H58A)

Years of issue: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

Useful information:
In our store there is a wide choice of sizes of spacers on each axle, this set of clearance increase is presented in the size that will give you +50mm, if you need spacers of other size write us to the mail, with Regards team RisingTuning.

Importantly:
Any work with the replacement of suspension elements is accompanied by alignment at the end of the work and installation of lift spacers is no exception.
Yes, you will still be able to use the car without alignment, but we strongly recommend not to miss this important point in the maintenance of the car.