New at RisingTuning, the KEIN Lift Kit for the 3rd generation Subaru Forester SH.
What is its main difference from other lift kits? First - Front spacers have height 50mm, and at increase in clearance more than 2 inches radically changes angle of wheel convergence, that is why spacers are made with displacement, such decision leaves possibility to adjust suspension more accurately and drive comfortably not only off road but also on highway, amplitude of angles adjustment (camber and caster) remains on factory values. Front spacers are mirrored and navigated for installation, for the right side you need spacer R, respectively for the left side - L. And also the arrows will show you which side to install it.

Item content:
• x2 Front steel spacers with axis offset | 50 mm / 2 inches
• x2 Rear steel spacers | 50 mm / 2 inches 
• x2 Rear subframe brace spacers | 50 mm / 2 inches 
• x4 Rear subframe spacers | 50 mm / 2 inches 
• x2 brake hose brackets

Fastening elements:
• x8 M8 nuts
• x4 M10 nuts
• x4 M14/L200mm bolts
• x4 M10/L75mm bolts
• x2 M8/L20mm bolts

Features:
• Material: Steel
• Thickness: 3mm
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 10.9 zinc

Weight: 6.8kg.

Important:
Please note that we recommend when installing this lift kit also replace and install elongated front stabilizer bar links - these rods have OEM number 20420FA020 (Front Suspension Stabilizer Bar Link).

This complete lift kit is compatible with this cars:

SUBARU FORESTER

Europe & World:
Subaru Forester [SH/S12], 3 Gen, SUV, 12.2007 - 09.2010, Body: SH
Subaru Forester [SH/S12], 3 Gen Facelift, SUV, 10.2010 - 02.2013, Body: SH, SH9L, SHJ, SHM

Japan & World:
Subaru Forester [SH/S12], 3 Gen, SUV, 12.2007 - 09.2010, Body: SH5
Subaru Forester [SH/S12], 3 Gen Facelift, SUV, 10.2010 - 10.2012, Body: SH9, SH5, SHJ

USA & World:
Subaru Forester [SH/S12], 3 Gen, SUV, 12.2007 - 09.2010, Body: SH9
Subaru Forester [SH/S12], 3 Gen Facelift, SUV, 10.2010 - 02.2013, Body: SH9

Years of issue Forester: 2007, 2008, 2009, 2010, 2011, 2012, 2013

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the suspension are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.

Advantages:
✅ After installing this extra-durable, easy-to-install and very affordable spacers all terrain features of your car will increase thanks to rised ground clearance and you will conquer the worst off-road.
✅ Sharp land bends, speed bumps, parking near curbs, maneuvering in the snow and on country roads, wherever before you had to be on the alert - no longer a problem with an additional 50mm under the bottom.
✅ Our spacers are often used when the stock springs lose their stiffness and spacers are the cheaper way to return the car to factory height than buying new springs.
✅ Spacers made of polyurethane and nylon have an additional damping effect, with them the ride will be even more pleasant. Whereas aluminum and steel spacers are essentially forever and will never need to be replaced.
✅ Also spacers are indispensable when installing larger diameter wheels.