Professional Lift Kit set for Toyota Highlander 3 XU50 | Spacers

Item content:
Front steel spacers (50mm (1.8 Inches)
Lower the upper strut mount when raising the suspension by 50 mm with camber compensation for the Toyota Highlander 3 generation.
• Front strut spacer 50 mm offset - 2 pcs, material steel, polymer coating.
• M10 nut - 6 pcs., zinc-coated.
• Locking washer D10 - 6 pcs. zinc-coated.
• Plastic plug - 2 pcs.
Installed on the original front struts, without knocking the bolts out of the native support, without the use of long bolts.
The spacers are made with an offset, which allows to compensate the front wheels camber angles during the suspension elevator, see photo.
Install with arrows outward - towards the fender (wheel).

Spacer over the rear spring (50mm (1.8 Inches)
• Spacer over the rear spring Toyota XU50 50 mm - 2 pcs, material - polyurethane.
Install on OEM Toyota rebound 48049-0E011, 48048-0E011, 48048-0E030, 48049-0E030.
Before installing the spacer, the 48257-0E020 upper anti-squeaking gasket must be removed.
Allows you to leave the original 48231-0E200, 48231-0E390 rear springs and keep the suspension "soft".
Spacers are made of high grade polyurethane SCU-PFL-100
Shore a hardness 93A (International Standard ISO 868)

Rear Shock Absorber Brackets (40mm (1.6 Inches)
Transfer the brackets of the rear shock absorbers, with a suspension lift of 40-50 mm.
• Rear shock absorber bracket Toyota XU50-R 40 mm - 2 pcs.
• Nut M10 - 4 pcs. material steel, zinc-coated.
• Washer d10 mm - 4 pcs. zinc-coated steel.
Remove the original upper mountings 48516-0E010, 48517-0E010 of the rear shock absorbers.
Install this bracket on the two studs as shown in the photo.
Install the two spacer washers from the kit on the rear stud.
Install the factory shock absorber mount on the studs of this bracket and the rear stud.

Stabilizer adapter kit (40mm (1.6 Inches)
Stabilizer strut brackets, with a suspension lift of 40-50 mm. 
• Adapter for front stabilizer 40 mm - 2 pcs, material steel, zinc coating.
• Adapter for rear stabilizer bar 40 mm - 2 pcs, material steel, zinc coated.
• Bolt M12x35 - 4 pcs, material steel, zinc coating.
• SNK nut M12 - 4 pcs, material steel, zinc-coated.
• Washer d12 mm - 4 pcs, material steel, zinc-coated.
Install the adapters on the standard mountings using the bolts and nuts from the kit, as shown in the photo.
Install the stabilizer rods on these adapters.

Weight of entire set: 5.62kg.


This complete lift kit is compatible with this cars:

USA / World:
Toyota Highlander (XU50), 3 Generation, SUV & Hybrid, Years: 03.2013 - 02.2016, Body: ASU50, GSU50, GSU55, GVU58
Toyota Highlander (XU50), 3 Generation Restyling, SUV & Hybrid, Years: 03.2016 - 07.2020, Body: ASU50, GSU50, GSU55

Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

More:
In our store we also have a more budget clearance increase kit - suitable more for light cross-country and city

Rising Tuning company offers a convenient way to quickly and easily increase cross-country capability of your car - for this we recommend to buy spacers to increase ground clearance. Ground clearance is a characteristic, which largely determines the ability of the car to move on rough roads and unpaved roads, to drive over curbs and other obstacles. The lower the planting of the car, the less confident the driver feels off-road - by buying spacers, you can solve this problem.

Your car receives several undeniable advantages by installing spacers:
• Ground clearance is increased, thereby increasing off-road performance
• Increase the possible load of the car
• Spacers are also often used when installing mud rubber on off-road wheels
• Risk of mechanical damage to the engine housing and other engine compartment components is reduced
• Risk of scratches from bumpers and low-lying body parts being caught by bushes and grasses is minimized
• Save money on replacing weary coils by simply installing these affordable strut spacers and return car body to their original position.
• Alignment of the wheel mounting angles ( camber / convergence).

Advantages:
✅ After installing this extra-durable, easy-to-install and very affordable spacers all terrain features of your car will increase thanks to rised ground clearance and you will conquer the worst off-road.
✅ Sharp land bends, speed bumps, parking near curbs, maneuvering in the snow and on country roads, wherever before you had to be on the alert - no longer a problem with an additional 50mm under the bottom.
✅ Our spacers are often used when the stock springs lose their stiffness and spacers are the cheaper way to return the car to factory height than buying new springs.
✅ Spacers made of polyurethane and nylon have an additional damping effect, with them the ride will be even more pleasant. Whereas aluminum and steel spacers are essentially forever and will never need to be replaced.
✅ Also spacers are indispensable when installing larger diameter wheels.