Lift kit for Ford Explorer - Fourth generation | U251 | 2005-2010

Lift set for Ford Explorer - Fourth generation (2005-2010) | Classic Series

Increase the ground clearance and off-road capability of your fourth-generation Ford Explorer (U251, 2005–2010) while compensating for sagging factory springs. The heavy body-on-frame platform and independent rear suspension cause this generation to lose ride height over time, reducing clearance and capability on uneven terrain. This polyurethane lift kit raises the chassis back up, giving you the extra room needed to clear deep winter snow, rutted dirt roads, and trail obstacles. It restores the vehicle's proper stance and improves all-terrain confidence while keeping your original factory ride comfort unchanged.

• Front strut spacers | 40 mm (1.6") — 2 pcs.
• Rear strut spacers | 40 mm (1.6") — 2 pcs.
• Front Reinforced studs | M8 extended — 6 pcs.
• Rear Reinforced studs | M8 extended — 6 pcs.

• Front: +40mm lift (40mm spacers)
• Rear: +40mm lift (40mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2005, 2006, 2007, 2008, 2009, 2010

☑️ Full Compatibility: This lift kit is 100% compatible with all fourth-generation Ford Explorer and second-generation Explorer Sport Trac (U251 platform) model variants equipped with factory independent front and rear coil-over strut suspension (IRS). It seamlessly fits all trim levels (XLS, XLT, Eddie Bauer, Limited, and Ironman Package), both Rear-Wheel Drive (RWD) and 4-Wheel Drive (4WD/AWD) drivetrain configurations, across all powertrain options (including 4.0L Cologne SOHC V6 and 4.6L 24V 3-Valve Modular V8 engines) produced from 08.2005–12.2010.

• Front & Rear Axle Installation (Studs): This kit requires pressing out the original factory splined studs from both the front and rear upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Lift Height Disclaimer: Please note that the final achieved lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as factory spring fatigue, engine and powertrain weight configurations (lighter 4.0L V6 RWD vs. significantly heavier 4.6L V8 4WD/AWD drivetrains with transfer case and front differential), Class III/IV heavy-duty towing packages, third-row seat configurations, and added aftermarket accessories (such as steel bed covers or bull bars) can influence the final suspension height.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +40mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Ford Explorer:

• ◀️ Previous: Ford Explorer - Third generation [U152] (2001-2005)

• Next: Ford Explorer - Fifth generation [U502] (2010-2019) ▶️