Lift kit for Kia Carnival - Fourth generation | KA4 | 2020-present

Lift set for Kia Carnival - Fourth generation (2021-Present) | Classic Series.

Empower your Kia Carnival (KA4) to live up to its "Grand Utility Vehicle" title with the RisingTuning® Classic Series. This lift kit provides the essential ground clearance needed to protect your long underbody and expensive components from damage. Gain the extra ride height to prevent bottoming out under full load while preserving the precise handling and premium passenger comfort of your KA4.

• Front strut spacers | 30 mm (1.2") — 2 pcs.
• Rear coil spacers | 30 mm (1.2") — 2 pcs.
• Front Reinforced studs | M10 extended — 6 pcs.
• Additional fasteners | Mounting set — 1 set.

• Front: +30mm lift (30mm spacers)
• Rear: +30mm lift (30mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026+

This lift kit is specifically engineered for the Kia KA4 chassis (Fourth Generation). Starting with this generation, the manufacturer transitioned to a unified global name, though some regional differences remain:

• Kia Carnival — Now used as the primary name in North America, replacing the Sedona nameplate.
• Kia Carnival — Australia, Asia, Europe, and Global markets.
• Kia Grand Carnival — Commercial and high-capacity designations in specific regions.

Body Variations:

• Long Wheelbase — The primary configuration for the global market.
• Short Wheelbase — Available in selected regional markets.

☑ The kit is 100% compatible with both Long Wheelbase and Short Wheelbase models. It is designed to fit all trim levels and powertrain configurations, including internal combustion engines and hybrid variants produced from 2020 to the present day.

• Front Axle Installation (Studs): This kit requires pressing out the original factory splined studs from the front upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Rear Axle Installation: Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Note on Rear Spacer Design: To achieve the stated +30mm of actual lift, the physical thickness of the rear spacers is calculated to include the height of the original factory spring pads. By integrating these measurements, we ensure a precise fit and the exact lift height promised, regardless of the thickness of your old, worn-out factory isolators.
• Lift Height Disclaimer: Please note that the final lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as spring fatigue, engine weight (petrol vs. diesel), and the presence of heavy optional equipment can influence the final result.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +30mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Kia Carnival:

• ◀️ Previous: Kia Carnival / Sedona [YP] (2014-2021)