Lift kit for Kia Carnival / Sedona - Third generation | YP | 2014-2021

Lift set for Kia Carnival & Kia Sedona - Third generation (2014-2021) | Classic Series.

Enhance the everyday utility and ground clearance of your Kia Carnival / Sedona (YP). The RisingTuning® Classic Series is the ideal way to compensate for sagging springs and prevent bottoming out when fully loaded with passengers or cargo. Gain the extra ride height needed to protect your underbody on rough roads while maintaining the original suspension softness and refined comfort of your YP chassis.

• Front strut spacers | 40 mm (1.6") — 2 pcs.
• Rear coil spacers | 40 mm (1.6") — 2 pcs.
• Front Reinforced studs | M10 extended — 6 pcs.
• Additional fasteners | Mounting set — 1 set.

• Front: +40mm lift (40mm spacers)
• Rear: +40mm lift (40mm spacers)

📏 Looking for a different height?
Check the "Other Size Options" section at the bottom of this page for available spacer heights and custom configurations.

This complete lift kit is specifically engineered for:

Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

This lift kit is specifically engineered for the Kia YP chassis (Third Generation). The suspension mounting points and chassis geometry remain identical across all markets, regardless of the model name used by the manufacturer:

• Kia Sedona — North America and United Kingdom.
• Kia Carnival — Europe, Asia, Australia, and Global markets.
• Kia Grand Carnival — Regional name used in various international markets.

Body Variations:

• Long Wheelbase — Extended body version.
• Short Wheelbase — Standard chassis length version.

☑ The kit is 100% compatible with both Long Wheelbase and Short Wheelbase configurations. It is designed to fit all trim levels and engine variants (petrol and diesel) produced between 2014 and 2021.

• Front Axle Installation (Studs): This kit requires pressing out the original factory splined studs from the front upper strut mounts. They must be replaced with the provided reinforced extended studs to ensure sufficient thread engagement and maximum structural integrity.
• Rear Axle Installation: Important: The factory rubber spring isolators (gaskets) must be removed before installing the new spacers. Our spacers are designed to replace the factory isolators entirely, not to be installed on top of them.
• Note on Rear Spacer Design: To achieve the stated +40mm of actual lift, the physical thickness of the rear spacers is calculated to include the height of the original factory spring pads. By integrating these measurements, we ensure a precise fit and the exact lift height promised, regardless of the thickness of your old, worn-out factory isolators.
• Lift Height Disclaimer: Please note that the final lift height may vary depending on the individual condition and service life of your vehicle's suspension. Factors such as spring fatigue, engine weight (petrol vs. diesel), and the presence of heavy optional equipment can influence the final result.

Our spacers are manufactured from professional-grade Polyurethane SCU-PFL-100 (93A Shore hardness). This material is the core of our Classic line, offering distinct advantages:

• Comfort & Quiet:

  Unlike metal spacers, polyurethane effectively absorbs road vibrations, maintaining high ride comfort and reducing suspension noise.

• Stealth Appearance:

  ⚫ The solid classic black color of the polyurethane ensures that the spacers remain invisible under the wheel arches and look like original equipment.

• Extreme Durability:

  100% resistant to road salt, oils, and harsh weather conditions. Polyurethane never rusts or corrodes, making it ideal for both snowy regions and coastal areas with high humidity.

• Structural Integrity:

  The 93A hardness ensures the spacers hold their shape even under heavy loads, while remaining flexible enough to protect your suspension.

• Wheel Alignment: A professional wheel alignment is required after installing the lift kit. This is a mandatory step to ensure proper handling and to keep your tires wearing evenly.
• Self-Installation: A spring compressor is required for installation. Please ensure you have the proper tools if you plan to install the kit yourself.
• Professional Installation: For your safety and the best results, we recommend having this kit installed by a qualified mechanic or a suspension specialist.

While this kit is for +40mm, we offer various heights of spacers to help you build the perfect lift kit for your needs. You can combine different heights to compensate for rear-end sag or to achieve a specific custom stance for your vehicle.

Please contact us to place a custom order. We will help you select the perfect height for your vehicle and provide a custom quote for your personalized setup.

Looking for a different version? We have lift kits for other generations of the Kia Carnival / Sedona:

• ◀️ Previous: Kia Carnival / Sedona [VQ] (2005-2014)

• Next: Kia Carnival [KA4] (2020-present) ▶️