KARLTON fender flares for Subaru Impreza Bugeye GD | Wide body kit | 2000-2002

The Karlton body kit is one of the most famous extension kits for the Subaru Impreza. The design of these Fender Flares fits perfectly into the overall design of the car and doesn't stand out from it. If you have widened your wheelbase you just need this kit

As for this model, it is designed specifically for the second generation Subaru Impreza GD before the restyling, among its own called BUGEYE.

This kit contains the most correct and complete extension kit specifically for the second generation Subaru Impreza GD and you don't need to figure out which kit is correct and you don't need to question your order, you don't need to think through how to fit it to your car, think through which bumpers you have, Stock WRX or STI.
The second-generation model has one kind of bumper and our store RisingTuning assembled a ready-made solution, without modifications - which is 100% exactly right for your car.
Often stores offer you kits from the restyling versions of the product and offer to fit kits from restyling to your car - this is not a good solution, of course with modifications it will fit your car, but it is a waste of your time and effort, as well as the difference from the canonical solution.
Now you have found exactly what you need!

Item Content:
Karlton style fender flares, wheel arches extensions for Subaru Impreza GD 2000-2002 
• Front bumper arch extensions - 2 pcs.
• Front fender arch extensions - 2 pcs.
• Rear bumper & fender arch extensions - 2 pcs
• Rear doors arch extensions - 2 pcs.

Features of this product:
• Made of high-quality Fiberglass
• Adds 40mm (1.6 inches) to each fender.
• Slight preparation for painting is required to customize the fitment;
• Surface finish: unpainted mat
• Material thickness 4 mm
• The product is unpainted. Therefore can have small scratches. Use without coating or painting is not provided
• We do not offer work to painting car parts to export.

More:
If this page was recommended to you and you were looking for a KARLTON body kit for the restyling version, we have great news - we have them in our store, we will be happy to offer you:
Front fenders Karlton for BlobEye | 2002-2005
Front fenders Karlton for HawkEye | 2005-2007
Rear fenders Karlton for WRX bumper | HawkEye & BlobEye | 2002-2007
Rear fenders Karlton for STI bumper | HawkEye & BlobEye | 2002-2007


This fenders is compatible with this cars:

STOCK

Europe / World:
Subaru Impreza (GD/G11), 2 Generation, Sedan 5-doors, Body: GD9, Years: 04.2000 - 10.2002

WRX 

Europe / World:
Subaru Impreza WRX (GD/G11), 2 Generation, Sedan 5-doors, Body: GD, GDA, Years: 04.2000 - 10.2002

Japan / World:
Subaru Impreza WRX (GD/G11), 2 Generation, Sedan 5-doors, Body: GD9, GDA, Years: 08.2000 - 10.2002

WRX STI

Europe / World:
Subaru Impreza WRX STI (GD/G11), 2 Generation, Sedan 5-doors, Body: GD, Years: 04.2000 - 10.2002

Japan / World:
Subaru Impreza WRX STI (GD/G11), 2 Generation, Sedan 5-doors, Body: GDB, Years: 10.2000 - 10.2002

*Only for sedan

Years: 2000, 2001, 2002

Installation:
Installation is not easy, you will need an expert unless you are an expert in bodywork yourself.

These fender flares have 8 parts and even for a professional it will not be an easy task, for a perfect result we recommend to contact a professional!
First of all, check the elements to the body, for example using masking tape glue arches to the body and conduct a visual assessment (estimation) - matrices were created with the car that was new from the salon, during the operation your car was involved in the accident, if you have deformities on the body, tell the master at the same time to eliminate the defects on the body to the factory state, This will create a perfect seal between the fender flares and the body of your Subaru Impreza, as well as eliminate any tension of the material during installation and operation - the part should stand freely - it has elasticity and memory, do not deviate from the norm of memory material, aggressive tensioning can cause a gap in the connection over time during operation.

After a visual fitting and eliminating possible bodywork, make a mark for the installation of the body extension Karlton, mark places for drilling for rivets or bolts. You can use masking tape as a canvas to make the markings and not to spoil the car's paintwork.
Once you have everything measured, drill holes in the body and fenders and install them on the car, remove them and now you can paint the parts.

After painting, wait until the parts are completely dry, and once they are dry, install them. Treat the holes - protect the exposed metal from oxidation, the paint has the same protective function, not only aesthetic.
For a right and technological joint use sealing tape, it is also available in our store, it is the right and technological solution, it will avoid damage to paintwork, will dampen the vibration and help reduce the stress of the materials when using the car, not all roads are like a race track, Subaru fans are special fans to go beyond the highway taking all the advantages of four-wheel drive, especially for you - must seal.

All materials have a different density, the sealant will be able to compensate for the different density of the material, especially between the metal and Fiberglass use sealing tape, it will perform a shock-absorbing role as well as keep moisture to the metal.

You can also install the extension to the black sealant car, in this option does not need to make holes in the body, but use only quality materials, if installed on the sealant, it will perform cushioning and moisture protection functions, sealant in this option is not necessary

Take your time, good luck enthusiast!

Material of this fenders:
The fender flares is made of quality fiberglass and the most expensive epoxy resins that are designed to create tuning parts. We use only the best matrixes that are created by real professionals who are engaged in the creation of parts for more than a decade.
The fender flares a base gray primer and is ready for painting.