Widespread
Click to enlarge
1/29
Hood Scoop Splitter for Subaru Impreza 1 GC/GF | GDB intercooler
- Product Code: 029-GC-GDB
- Product Article: product-596
- Rating:
- Availability:
In Stock
-
$395
currency on the site: US Dollar (USD).
Shipping already included in the cost of good FREE WORLDWIDE SHIPPING
Hood Scoop IC splitter for Subaru Impreza WRX first generation is needed if you replaced the standard cooler with a higher performance one from Subaru Impreza 2 WRX STI GDB (2000-2007).
Rising Tuning's Hood Scoop splitter will help properly direct incoming airflow to the entire area of the upgraded top mount intercooler, while the rubber gasket on the bottom edge of the splitter creates a secure and tight connection between the splitter and intercooler - forming a straight tunnel. This increases the density of the incoming air and its incoming volume, allowing hot air streams to be diverted more efficiently and cooling the entire system as effectively as possible.
Thus with the installation of the Hood Scoop IC splitter, the peak power of your Forester SG is increased by increasing the cooling potential of the system.
If you do not install this splitter, you will not be able to realize the full potential and create alignment between the higher performance upper intercooler and the hood nostril.
Item content:
• RisingTuning Hood Scoop Splitter for Subaru Impreza WRX 1 GC/GF - 1 pc.
Compatibility conditions: WRX air intake + top cooler from Impreza STi GDB or GDB Engine Swap
• Sealing rubber - 1pc.
Specifications:
• Fits top mount intercooler for Subaru Impreza 2 WRX STi (2000-2007) GDB.
• Compatible with nostril Subaru Impreza WRX
Surface:
Powder coating (With baking of the product)
Material:
• Cold Rolled Steel - 1mm thickness
Zinc coating (Continuous galvanizing method)
What you get:
• Allows for proper alignment between the hood nostril and the intercooler
• Increased cooling system potential
• Increase your Impreza's peak power with a properly working upgraded performance cooling system
Weight: 1.2kg
The hood splitter is compatible with these cars:
• Subaru Impreza [GC/GF], 1 Generation, 1992 - 2000 (with a WRX nostril / Swap)
• Subaru Impreza WRX [GC/GF], 1 Generation, 1992 - 2000
• Subaru Impreza WRX STI [GC/GF/GM], 1 Generation, 1994 - 2000
Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Rising Tuning's Hood Scoop splitter will help properly direct incoming airflow to the entire area of the upgraded top mount intercooler, while the rubber gasket on the bottom edge of the splitter creates a secure and tight connection between the splitter and intercooler - forming a straight tunnel. This increases the density of the incoming air and its incoming volume, allowing hot air streams to be diverted more efficiently and cooling the entire system as effectively as possible.
Thus with the installation of the Hood Scoop IC splitter, the peak power of your Forester SG is increased by increasing the cooling potential of the system.
If you do not install this splitter, you will not be able to realize the full potential and create alignment between the higher performance upper intercooler and the hood nostril.
Item content:
• RisingTuning Hood Scoop Splitter for Subaru Impreza WRX 1 GC/GF - 1 pc.
Compatibility conditions: WRX air intake + top cooler from Impreza STi GDB or GDB Engine Swap
• Sealing rubber - 1pc.
Specifications:
• Fits top mount intercooler for Subaru Impreza 2 WRX STi (2000-2007) GDB.
• Compatible with nostril Subaru Impreza WRX
Surface:
Powder coating (With baking of the product)
Material:
• Cold Rolled Steel - 1mm thickness
Zinc coating (Continuous galvanizing method)
What you get:
• Allows for proper alignment between the hood nostril and the intercooler
• Increased cooling system potential
• Increase your Impreza's peak power with a properly working upgraded performance cooling system
Weight: 1.2kg
The hood splitter is compatible with these cars:
• Subaru Impreza [GC/GF], 1 Generation, 1992 - 2000 (with a WRX nostril / Swap)
• Subaru Impreza WRX [GC/GF], 1 Generation, 1992 - 2000
• Subaru Impreza WRX STI [GC/GF/GM], 1 Generation, 1994 - 2000
Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
- Subaru
- Impreza / WRX STi
- I 1992-2000 (GC, GF, GM)
- Impreza / WRX STi
Car compatibility
bugeyedrom/subaru_impreza_wrx_787651-removebg-preview-180x112.png)
Photos of customers
![Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches](https://risingtuning.com/image/cache/catalog/p/3890/img-0276-253x145.JPG "Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches")
![Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches](https://risingtuning.com/image/cache/catalog/p/3890/88dfae0a-2f8e-473c-9665-cadcfc4da4da-126x72.jpeg "Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches")
![Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches](https://risingtuning.com/image/cache/catalog/p/3890/x5w2bbcojbx41-126x72.jpg "Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches")
![Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches](https://risingtuning.com/image/cache/catalog/p/3890/t1vxlfo-126x72.jpeg "Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches")
![Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches](https://risingtuning.com/image/cache/catalog/p/3890/gp3xpl2-126x72.jpeg "Trailing Arm Spacers [rear set] for Subaru Forester, Impreza | 50mm / 2 Inches")
