Lip Fangs for front bumper SkyActiv Mazda6 & Mazda Atenza GJ

Item Content:
• Lip Fangs for front bumper Mazda6 & Mazda Atenza (GJ) - 2 pcs. ( Left & Right)
*Compatible only with Drive and Activ package!

Installation:
Installation is simple, paint the bumper moldings, wait until they are completely dry and then install them with bolts and sealing tape, or you can use automotive adhesive sealant or double-sided 3M automotive tape - all these ways will securely fix the moldings on the rear bumper.
Wait until the parts are completely dry before installing, and also degrease the surfaces before installing. We recommend painting the part the same color as the body. Good luck enthusiast!:)

This fangs is compatible with this cars:

MAZDA6

Europe/ World:
Mazda Mazda6 (GJ), 3 Generation, Sedan, Years: 08.2012 - 01.2015, Body: GJ
Mazda Mazda6 (GJ), 3 Generation Restyling, Sedan, Years: 02.2015 - 08.2017, Body: GJ521, GJ522, GJ523, GJ526, GJ527

USA/ World:
Mazda Mazda6 (GJ), 3 Generation, Sedan, Years: 08.2012 - 01.2015, Body: GJ

ATENZA

Japan/ World:
Mazda Atenza (GJ), 3 Generation, Sedan, Years: 11.2012 - 12.2014, Body: GJ5FP, GJEFP, GJ2FP
Mazda Atenza (GJ), 3 Generation, Sedan Restyling, Years: 01.2015 - 04.2018, Body: GJ5FP, GJEFP, GJ2AP, GJ2FP

Very important! These fangs are not suitable for the second restyling version.
These lip pads are suitable for the Pre-Restyle and First-Restyle versions. Examples in the gallery

Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018


Features of this product:
• Made of ABS plastic, this is not FRP
• Material thickness 3 mm
• Bolt on!
• Surface finish: Black glossy, no adjustment is needed, just paint
• This pads can be fastened with Bolts & 3M of double-sided car tape & Black glue.
• The product is unpainted. Therefore can have small scratches and pimples. Use without coating or painting is not provided.
• We do not offer work to painting car parts to export.

Advantages of ABS plastic:
Optimal combination of shock resistance and elasticity provides longevity of the products.
• Under light torsion loads plastic elements restore their original shape without residual deformation.
• High dimensional stability which allows manufacturing of complex molded products with high accuracy.
• Good adhesion to paint materials, which allows them to paint products in any desired color.

Material of this fangs:
Different materials are used for manufacturing car tuning elements, the beauty, practicality and durability of the parts depend on their properties. To make you satisfied with the results, Rising Tuning manufactures and procures car parts including ABS plastic, a polymer that differs favorably from other materials. This plastic demonstrates increased impact resistance, in which it surpasses styrene copolymers - polystyrene. This material is also characterized by mechanical stiffness and strength, wear resistance and resistance to deformation and melting in short-term heating up to 100 degrees Celsius. At temperatures up to 70-80 degrees Celsius, products made of this polymer can be used for a long time without their qualities deteriorating and while maintaining dimensional stability. These properties allow to use ABS plastic for manufacturing of the most various elements of car body